--- title: "Appliance installation" description: "Jenn air dishwasher installation — jennAir appliance installation: built in, paneled, or both — which is nearly everything on this make." url: "https://jennairmiami.support/services/appliance-installation/" date_modified: "2026-08-24" Appliance type: "Cooktops and rangetops, Dishwashers, Freezers, Ice machines, Microwaves, Ranges, Refrigerators, Wall ovens, Wine cellars" --- # JennAir appliance installation ### Why this costs more on this make Almost nothing in this line stands on the floor. Ranges are trimmed to cabinetry, wall ovens go into tall openings, refrigeration is columns and built-in cabinets behind panels made by your cabinetmaker, and the dishwashers, cellars and ice machines live under counters and breathe through a grille. Hanging a door on an appliance and aligning it to a run of cabinets is a different job from sliding a machine into a gap, and pretending otherwise is how a kitchen ends up with a door that has to be pushed shut. ### The five installation mistakes we are called back for - **The disposal knock-out plug**, left in place so the new dishwasher never drains. - **A drain hose with no high loop**, which lets the sink back into the machine. - **An induction cooktop in a sealed island** with none of the ventilation its own instructions asked for. - **An undercounter appliance with its grille covered** by a kick panel fitted flush afterwards. - **A wall oven in an opening cut for a different appliance**, which never quite sits right and never quite vents right. ### What it costs From $225, moving with the appliance and with what the opening turns out to be. The figure is confirmed once the installation has been looked at, and if the opening needs work before the appliance can go in, you hear that before anything is unboxed. What this involves Clearances and ventilation to the maker's own instructions Cabinet panels hung, aligned and left square The mistakes that become service calls, avoided at the start Read the opening before the appliance Width, depth, height, the electrical and the plumbing, and — for induction and for every undercounter appliance — the ventilation the instructions actually ask for. An opening cut for a different machine is found now rather than in six months. Set it level and secure it A cabinet that is not level does not close square, and a heavy paneled door magnifies every fraction of that. Levelling is the least visible part of this job and the one that decides whether the door seals. Hang the panel and align it Your cabinetmaker's door on the appliance's hinges, carrying its own weight, set square and set to close on its own. This is the part that separates a built-in kitchen that works from one that looks right and does not. Prove it before we leave Water on and no weeping, drain running with a high loop, ventilation clear, doors sealing on a banknote test, and the appliance run through a real cycle rather than switched on and off. Why this costs more on this make Almost nothing in this line stands on the floor. Ranges are trimmed to cabinetry, wall ovens go into tall openings, refrigeration is columns and built-in cabinets behind panels made by your cabinetmaker, and the dishwashers, cellars and ice machines live under counters and breathe through a grille. Hanging a door on an appliance and aligning it to a run of cabinets is a different job from sliding a machine into a gap, and pretending otherwise is how a kitchen ends up with a door that has to be pushed shut. The five installation mistakes we are called back for The disposal knock-out plug, left in place so the new dishwasher never drains. A drain hose with no high loop, which lets the sink back into the machine. An induction cooktop in a sealed island with none of the ventilation its own instructions asked for. An undercounter appliance with its grille covered by a kick panel fitted flush afterwards. A wall oven in an opening cut for a different appliance, which never quite sits right and never quite vents right. What it costs From $225, moving with the appliance and with what the opening turns out to be. The figure is confirmed once the installation has been looked at, and if the opening needs work before the appliance can go in, you hear that before anything is unboxed. ### What goes wrong at installation that you see later? A short list and we see all of it: a disposal knock-out plug left in place so a new dishwasher will not drain, a drain hose with no high loop, an induction cooktop set into a sealed island with none of the ventilation its own instructions asked for, an undercounter cellar in a run with a kick panel over its grille, and a wall oven in an opening cut for a different appliance. Every one of those becomes a service call, usually within the year. ### Can you hang my cabinet panels? Yes, and on this make it is most of the job. Panel-ready appliances are the majority of this line, and the difference between a door that closes on its own and one that has to be pushed is alignment rather than hardware. ### Do you take the old appliance away? That is arranged separately and it is worth saying at the booking, because getting an old built-in cabinet out of millwork is real time and occasionally needs two people. It is not a surprise we like to have on the day. ### Does installing it yourselves affect the warranty? The maker's warranty asks that an appliance be installed, operated and maintained according to its own instructions — that is its wording, and it is the reason this job is done to those instructions rather than to habit. What we can tell you is exactly what the instructions required and what was done. Whether a particular claim is honored is between you and the manufacturer. --- **[Read full article: Appliance installation](https://jennairmiami.support/services/appliance-installation/)**