Repair cost
JennAir range burner and ignition repair cost
One igniter on one burner is the "from". A real share of these calls are a burner cap seated wrong after a cleaning and cost the visit only. Absorbs the griddle and grill zones, which are their own circuits let into the middle of a working cooktop.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
The short version
Where this figure comes from
A starting point for built-in appliances in South Florida, published so the number is not a mystery until somebody is standing in your kitchen.
Starts at
from $185
After a diagnostic from $95, which comes off the bill when you go ahead with the work.
or call (305) 745-7213
It is not
A quote for your unit
Exact cost
Confirmed after the on-site diagnostic
Warranty
On the labor we performed
What moves it
Why two of the same job cost different amounts
These apply at the same time and in both directions. Which of them is true of your kitchen is what the on-site diagnostic settles.
-
One burner or all of them
All of them clicking without lighting is one spark module rather than six igniters, which is much better news than it sounds.
-
Which stage of a dual-stacked burner
The high flame and the simmer have separate gas paths and separate sets of ports. A simmer that will not hold while the high flame is perfect is a specific and different repair.
-
The griddle or grill zone
Priced here, from $215. They are separate heated circuits with their own controls, so the rest of the range keeps working while a part is on order — and nothing about the ovens underneath is involved.
-
Whether it was recently cleaned
A cap put back a fraction out of place is the single commonest reason one of these misbehaves, and it costs the visit.
The work itself
What we actually do
The job behind the figure: what it involves, when a symptom points at it, and what we check first.
-
from $185 Range burner & ignition repair
A burner that clicks and will not light, lights and drops out, or holds a hard flame and refuses to come down to a simmer. On a dual-stacked burner that last one is its own repair, because there are two gas paths under one grate.
- Cap seating and port cleaning before any part
- Spark, sensing and gas told apart rather than lumped together
- Each stage of a dual-stacked burner proved separately
In more detail
About JennAir range burner and ignition repair cost
What jenn air range burner costs: range burner and ignition repair cost, the national range it was checked against, and the three things that decide where inside it your job lands.
Four searches under one complaint
"The burner will not light" covers a spark that is not happening, a spark that finds no gas, gas that lights and is not recognized, and a cap put back wrong. They are separated by what the burner does rather than by what it fails to do — which is why the questions on the phone are about clicking, smell, and how recently anybody cleaned it, and why a real share of these end at the visit fee.
Dual-stacked burners, and what they add
The professional ranges and rangetops on this make use burners with two rings of flame stacked under one grate, so a position can sear hard and genuinely simmer. That is why they cook well and why there is more to go wrong: two gas paths and two sets of ports per position. Published service data names professional-style ranges among the more service-prone cooking categories, with igniters and high-heat parts leading, which is why this is its own row rather than folded into the oven page.
What the griddle and grill add
They are separate heated zones with their own controls and sensors, let into the middle of a cooktop that is otherwise fine. That contains the problem: the burners and the ovens carry on working, which is unusual on a repair of this size and is worth knowing before you rearrange a week around it.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards
Before you book
Questions about JennAir range burner and ignition repair cost
Every burner clicks and none light. Is that six repairs?
Almost certainly one. A single spark module usually serves several burners, so all of them behaving the same way points at one part rather than at each position. It is one of the few times a bigger symptom is better news.
Can I keep cooking while the griddle is fixed?
Yes, almost always. The griddle and grill are separate circuits, so the burners and the ovens keep working. We check and confirm that before leaving if a part has to be ordered.
It started right after I cleaned the cooktop.
Then say so, because it changes where we start. A burner cap seated a fraction out of place, or one that went back damp, is the commonest cause of this and it costs the visit fee and nothing else.
Where we do it
Across Miami-Dade, Broward, and Palm Beach
Same terms everywhere we go: an on-site diagnostic first, the price agreed in writing, and the exact figure confirmed once we have seen the unit.
Neighborhoods people ask for by name